BATU ULUSLARARASI TAŞIMACILIK ve TİC. LTD. ŞTİ.

Kocaeli - Çayırova/ Şekerpınar Tesislerinde Depo ve Antrepo İşletmeciliği yapan ANAHTAR ANTREPO TİCARET LİMİTED ŞİRKETİ'mize TOPLAMACI, PAKETLEMECİ, KONTROLCÜ ve SEVKİYATÇI olarak istihdam edilmek üzere elemanlar alınacaktır.

 

• Lojistik depoda toplama, paketleme ve kontrol işlerinde çalışacak,
• Gerekli elleçleme, paketleme ve etiketleme işini yapacak,

 

 

• En az lise ve dengi okul mezunu,
• Konusunda en az bir yıl deneyimli,
• Elektrikli transpalet ve El Terminali kullanabilen,
• Dikkatli ve düzenli çalışma alışkanlığına sahip,
• İşe devam konusunda titiz,

Maltepe, Kartal, Pendik, Tuzla, Sultanbeyli, Sancaktepe, Gebze, Çayırove ve Darıca'da ikamet eden adayların başvurularını bekliyoruz.

 

Taşımacılık, Antrepo (Gümrüklü Depolama), Serbest Depo sektöründe faaliyet gösteren firmamızın Kocaeli - Çayırova‘ da istihdam edilmek üzere;

 

• Muhasebe kayıtlarının zamanında, tam ve doğru olarak tutulmasını sağlayarak, kayıtların kontrolünü yapmak,
• SMMM ve Yeminli Mali Müşavirle koordineli çalışmak,
• Yönetim Muhasebesi uygulamasını geliştirmek,
• Bankalar, tedarikçiler ve müşterilerle mali işleri takip etmek,
• Dönemsel finansal raporların hazırlanmasını sağlamak (Bilanço, Gelir Tablosu) ve analizlerini yapmak,
• Vergi dairesi ve SGK işlerinin takibini yapacak Mali İşler Yöneticisi arıyoruz.

• Üniversitelerin ilgili bölümlerinden (işletme / iktisat / muhasebe) mezun,
• En az 10 yıl muhasebe ve finans alanında tecrübeli (tercihen taşımacılık ve lojistik sektöründe),
• Antrepo depo muhasebesi ve maliyet muhasebesini bilen ve ilgili süreçlere hakim,
• Tek düzen hesap planı, mali tablolar, beyannameler, bütçe, genel muhasebe gibi tüm muhasebe süreçlerine hakim, SSK ve vergi mevzuatını iyi derecede bilen,
• Muhasebe ve MS Ofis programlarına hakim, tercihen Soft Finans ve Soft Trans yazılımlarını aktif kullanabilen,
• Muhasebe ve finansal raporlama tekniklerini bilen,
• Firmamızın tüm muhasebe ve finans uygulamalarını ön muhasebe personeli ile beraber götürebilecek,
• Tercihen SMMM belgesine sahip,
• Sorumluluk sahibi, titiz, düzenli ve dikkatli çalışan, iş takibi ve planlaması yeteneği yüksek, analitik düşünebilen,
• Yoğun çalışma temposu ve esnek çalışma saatlerine uyum sağlayabilen,
• Etkili sözlü ve yazılı iletişim becerisi ile insan ilişkileri kuvvetli, dış görünümüne özen gösteren,
• Vergi daireleri, SGK gibi resmi kurumlarla ilişkileri yönetebilecek bilgi ve birikime sahip,
• Ekip çalışmasına yatkın ve personel yetiştirebilecek özelliklere sahip,
• Tercihen Anadolu yakası, Tuzla taraflarında ikamet eden,
• Erkek adaylar için askerlik görevini tamamlamış,

 

Job Description
In charge of the Electrical engineering and Control system profiles and participate in the construction of  composite material production line, equipment installation and debugging, and so on.Designs and develop control systems and panels, and continuously improve, update to improve according to the requirements of the process engineer and production team, and soliciting observations from operators.Keeps all electrical and control systems of the factory in good conditions by scheduled maintenance; following manufacturer’s instructions and established standard operation procedures. Make annual and monthly maintenance plans and implement them, spare parts and documentary management, and achieve the season and annual target operation rate of lines. Coordinate and support the production team and make the production in good order, and achieve the annual target of yield, quality and cost together with the whole team. Keep on learning to be enhance professional level, and train and supervise the electrical technicians.Provides engineering information by answering questions and requests. Maintains product and company reputation by complying with government regulations. Ensuring the whole electrical and control system comply with safety and quality standards and performing risk assessments.Other duties as may arise from time to time and as may be assigned to the employee. Devote the whole of his time and attention to the business of the Company, use his best endeavors to promote the interests of the Company, and comply with all lawful instructions given to him by the Company or any of its duly authorized representatives.

At least Bachelor degree. Major in Electrical Engineering, Instrument Science, Automation Science or Mechanical and Electrical engineering. At least five years’ work experiences of maintenance, design, manufacturing and optimization of Electrical engineering, control system and machinery in the factory, preferred in the fields of chemical fiber or chemical relatedExcellent capability of optimize the control system and machinery to enhance efficiency, quality and improve process and safety; designing and drawing the electrical system from high-voltage cabinet to low-voltage switchgear.Be proficient with control principle of pressure, flow, temperature, speed, torque, tension, liquid level, synchronization, and so on. Be familiar with frequency converter, various motors and pumps, heaters, chillers and hydraulic press system. Be Proficient in fault analysis and debugging, documentary management and planned maintenance of electrical engineering and control system.Be proficient in electrical and control drawing/scheme software of AutoCad, Protel and etc. Be Proficient in programming Language of C/C++/VB, and can develop independently control systems and panels of PLC (programmable logic controller) and DCS (Distributed control system) meeting the process requirement. Familiar with HSE (health, Safety and Environment) policy and execution. Hard-working, Integrity, Honest, Dedicated, good at thinking. Strong ability of communication and coordination, and good leadership in the factory.

In charge of the Mechanical profiles and participate in the construction of composite material production line, equipment installation and debugging, and so on.Designs mechanical and electromechanical products and systems by developing and testing specifications and methods, and continuously improve, update the machine to improve according to the requirements of the process engineer and production team.Develops mechanical and electromechanical products by studying customer requirements; researching and testing manufacturing and assembly methods and materials; and soliciting observations from operators.Keeps all equipment and machines operational by coordinating TPM and scheduled maintenance; following manufacturer’s instructions and established standard operation procedures. Make annual and monthly maintenance plans and implement them, spare parts and documentary management, and achieve the season and annual target operation rate of lines. Achieve the annual target of yield, quality and cost together with production team. Keep on learning to be enhance professional level, and train and supervise the mechanical technicians.Provides engineering information by answering questions and requests. Maintains product and company reputation by complying with government regulations. Ensuring machines comply with safety and quality standards and performing risk assessments.Other duties as may arise from time to time and as may be assigned to the employee. Devote the whole of his time and attention to the business of the Company, use his best endeavors to promote the interests of the Company, and comply with all lawful instructions given to him by the Company or any of its duly authorized representatives.

At least Bachelor degree. Major in Chemical Machinery and Engineering or Mechanical and electrical engineering.At least five years’ work experiences of production, machine design, manufacturing, maintenance, and modification in the factory, preferred in the fields of chemical fiber, fabric/textile and composite made by high-performance fiber. Capability of optimize the machine or equipment to enhance efficiency and improve process, designing and drawing the equipment and its parts, manufacturing and debugging independently.Be familiar with textile and fabric machinery, and common chemical machinery. Be familiar with various motors and pumps, various gear box, gear reducer and worm, driving and screwing systems, heaters, chillers and hydraulic press and hydraulic system. Be Proficient in fault analysis and debugging, documentary management and planned maintenance of electrical engineering and control system.Be proficient in machinery documentary management, TPM (Total Productive Maintenance) and process of planned maintenance. Be proficient in mechanical drawing software of AutoCad, SoildWorks, ProE, and etc. Familiar with HSE (health, Safety and Environment) policy and execution. Hard-working, Integrity, dedicated, good at thinking. Strong ability of communication and coordination, and good leadership in the factory.

En az 5 yıl tecrübeli,

 Meslek liselerinin Tekstil, Kimya, Motor, Otomotiv, Elektrik,Elektronik, Talaşlı İmalat bölümlerinden mezun

Mekanik montaj yapabilecek

İyi düzeyde bilgisayar bilgisine sahibi,

 Vardiyalı çalışmaya uyum sağlayabilecek,

Erkek adaylar için askerliğini tamamlamış, 

Etimesgut, Sincan veya Polatlı'da ikamet eden/edebilecek olan

Üretim hattındaki makinelerde vardiyalı operatör olarak çalışabilecek

En az 5 yıl tecrübeli, Meslek liselerinin

Tekstil, Kimya, Motor, Otomotiv, Elektrik,Elektronik, Talaşlı İmalat bölümlerinden mezun

Mekanik montaj yapabilecek

İyi düzeyde bilgisayar bilgisine sahibi, 

Vardiyalı çalışmaya uyum sağlayabilecek,

Erkek adaylar için askerliğini tamamlamış,

 Etimesgut, Sincan veya Polatlı'da ikamet eden/edebilecek olan

Üretim hattındaki makinelerde vardiyalı operatör olarak çalışabilecek